Thin Film Solar Cell & Panel (SOCL)

  • Status
    Ongoing
  • Status date
    2008-01-16
Objectives

The scope of the activity is to define the flight Thin Film Solar Cell Demonstration Module and to breadboard critical elements.

Thin film cells have shown promising performance figures enabling new solar array concepts with power to mass ratio's beyond the current standard and attractive cost figures. However, the thin film technology is not mature enough. A step-by-step approach is proposed for the introduction on commercial satellites. The first step, proposed for the present activity, is to prepare a demonstration for performance and environmental characterisation to be flown on a planar solar array.
Challenges

Development of space worthy solar cells in CIS technology Integration of these cells into a spacecraft solar array breadboard.

Benefits

Providing of a European supply of thin film solar cell technology.

Features

Not Applicable.

Plan

Phase 1: Definition of Demonstration Module / Design of breadboard


Phase 2: Manufacturing of Breadboard / tests / update definition

Current status

Breadboard of 840 to 500 mm² size manufactured with 129 solar cells in two strings. Measurements of electrical characteristics (efficiency under sunlight, under test setup, insulation resistance of solar network against ground, resistance over electrical network). First campaign of thermal-vacuum cycling has been performed. Acoustic test between 2 dummy panels representing rigid solar panels has been successfully overcome (147 dB overall excitation). Ready to start with 2nd thermal cycling test campaign.



Breadboard with 129 cells in two strings






click for larger image

Documentation

Documentation may be requested

Last update
2024-11-22 22:52